Designed & 3D-printed by Modula Lab
Tow Hook
Camera Mount
A solid mount for the DJI Osmo Pocket or any action camera that clamps onto your car’s tow eye. No suction cups, no springs, no maintenance — just steady footage from a low, bumper-level angle.
Complete four-part kit
Fits the standard VW Group tow eye 8K0 805 615 — the one already in your trunk. The tow eye itself is not included.
Why this mount
Solid where it counts,
soft where it matters
No suction cups
The mount clamps mechanically onto your car’s tow eye. Nothing to lose its grip in summer heat, winter cold or on a rough road.
Soft bridge, steady shots
A flexible spacer frame between the clamp and the camera soaks up small vibrations, so your footage stays smooth without a wobbly mount.
Nothing to break or service
No springs, hinges or shock absorbers. No moving parts that can wear out, clog with dirt or need maintenance.
Osmo Pocket & GoPro ready
Holds the DJI Osmo Pocket securely and uses a standard mount, so it also works with GoPro and other action cameras.
Uses your factory tow eye
Built around the standard VW Group tow eye (8K0 805 615) that already lives in your trunk. Nothing extra to buy.
Low, dramatic angles
Mounted at bumper height, the camera sits close to the road for shots you’ll never get from behind the windscreen.
What’s in the box
Four parts. One solid mount.
01
Upper hook clamp
Fits over the top of the tow eye.
02
Lower hook clamp
Closes around the tow eye from below and locks together with part 01.
03
Flexible spacer frame
The soft “bridge” between the clamp and the camera that absorbs small vibrations.
04
Camera clamp
Holds the DJI Osmo Pocket firmly and attaches it to the rest of the assembly.
Tow eye not included
Assembly guide
Set up in three steps
Watch the full assembly video, then follow the steps below. No drilling, no adhesive, no changes to your car.
Assembly video coming soon
Step 01
Fit the tow eye
Take the tow eye from your car’s toolkit and screw it into the towing socket in the bumper, exactly as you would for towing.
Step 02
Clamp the hook
Place the upper and lower clamps (01 + 02) around the eye from above and below, and secure them together.
Step 03
Attach the camera
Connect the flexible spacer frame (03) and the camera clamp (04), insert your Osmo Pocket or action camera, and hit record.
Compatibility
Fits most VW Group cars
Designed around the standard WAG tow eye, part no. 8K0 805 615. If your car came with this tow eye, the mount fits.
Volkswagen
Golf 7 (incl. GTI, R, Variant)
Passat B8
Arteon
Tiguan II & Allspace
T-Roc
Touran II
Caddy 5
ID.3
Audi
A1 (8X)
A3 (8V, 8Y)
A4 / S4 (B8, B9)
A5 / S5 (B8, B9)
A6 (C7, C8)
A7 (4G, 4K)
Q3 (F3)
Q5 (8R, FY)
TT (FV)
Škoda
Octavia III
Octavia IV
Superb III
Kodiaq
Karoq
SEAT / CUPRA
Leon (2020+)
Ateca
Formentor
How to check: find the tow eye in your trunk (usually next to the jack in the spare-wheel well) and look for 8K0 805 615 stamped on it. This list is based on parts-catalogue data — model years and markets can differ. Not sure? Email your car model and year to info@modula.ee and we’ll confirm before you buy.
Sample footage
See what it captures
Shots from a low, bumper-level point of view — the angle that makes every drive look faster.
Sample footage coming soon
Clip coming soon
Clip coming soon
Tow Hook Camera Mount · €45
Ready for the road?
The complete four-part kit, ready to clamp onto the tow eye already in your trunk. Secure checkout with Stripe.